Specification:
Comply to UNI EN 15714-3:2009 standard
ISO connection standard:UNI EN ISO 5211。
Auxiliary connectioin:NAMUR,VDI/VDE3845
Control angle:90°(-5°~+3°)。
Torque:Relative to control pressure and type.
Working Condition:
Operation temperature:-20℃~+120℃
Pressure:2-8bar
Operating Medium:Filtered compressed air dry or lubricated.The pressure condensation point in accordance with (ISO 8573-1:2010, Class 3) has to be ≤ - 20℃ or 10℃under ambient temperature.
The maximum particle size in accordance with (ISO 8573-1:2010, Class 5) should not exceed 40 µm.
High Frequency Scotch yoke pneumatic actuator for valves Benefits:
1.Corrosion-resistant connectors All connection bolts are stainless steel with good corrosion resistance 2.Piston ring The piston guide ring, made of ultra high molecular polymer, has an extremely low coefficient of friction, while the material has high hardness and excellent wear resistance, providing precise guidance and long service life. 3.Body The cylinder body is processed with high precision and anodized. The thickness of the oxide layer is more than 20μm. It has low friction coefficient and excellent anti-corrosion and wear resistance. 4.Shaft bearing Prevent direct contact between shaft and cylinder body, ensure the positioning accuracy of drive shaft, reduce friction loss, make the actuator efficient operation. 5. Piston bearing Ensure the positioning accuracy of the piston, so that the piston can be smooth and smooth operation, prevent shifting. 6. Pin connection The fork and the drive shaft are connected by pins to ensure that the fork and the drive shaft run synchronously. At the same time, the pins also play a role in preventing the drive shaft from flying out, which is a reliable and safe design. |
Part Number and Material:
Schedule:
Pos | Description | Material |
1 | Cylinder 1 | Aluminium Alloy |
2 | Piston | Aluminium Alloy |
3 | Shaft | Alloy Steel |
4 | Yoke | Alloy Steel |
5 | Piston pin | Alloy Steel |
6 | Yoke pin | Alloy Steel |
7 | Bearing | Alloy Steel |
8 | Upper circlip | Stainless Steel |
9 | Lower circlip | Stainless Steel |
10 | Upper washer | Crystalline Polymer |
11 | Lower washer | Crystalline Polymer |
12 | Upper shaft O-ring | FKM |
13 | Lower shaft O-ring | FKM |
14 | Upper shaft bearing | Crystalline Polymer/Graphite Copper Bushing |
15 | Lower shaft bearing | Crystalline Polymer/Graphite Copper Bushing |
16 | Upper piston bearing | Crystalline Polymer |
17 | Lower piston bearing | Crystalline Polymer |
18 | Piston ring | Crystalline Polymer |
19 | Piston O-ring | FKM |
20 | Piston support chip | Crystalline Polymer |
21 | Connection plate O-ring 2 | FKM |
22 | Connection plate 2 | Aluminium Alloy |
23 | Plate socket screw 2 | Stainless Steel |
24 | Cover socket screw | Stainless Steel |
25 | Nut O-ring | FKM |
26 | screws | Stainless Steel |
27 | End Cover Seal Ring | FKM |
28 | Double Acting End Cover | Aluminium Alloy |
29 | Set Screw | Stainless Steel |
Note: 1)180-260 body is split type.
2)140-260 not included.
Above illustration for internal structure demonstration only,not for all models and parts.
E-mail: support@kanede.com
Tel: 0086-519-85557268
Fax: 0086-519-85557368
Add: No. 206 Yuntaishan Road., Xinbei District, Changzhou, Jiangsu province, China