Declutchable gearbox
-Torque range up to 22000 Nm
-9 sizes
-Ratios from 26:1 to 520:1
-Cast iron/aluminum alloy housing
-Optional high and low temperature
-Optional ISO drive coupling
support@kanede.com
Search
support@kanede.comSearch
0-Torque range up to 22000 Nm
-9 sizes
-Ratios from 26:1 to 520:1
-Cast iron/aluminum alloy housing
-Optional high and low temperature
-Optional ISO drive coupling
lManual of clutch
The company's products are used in petroleum,chemical,pharmaceutical, water treatment,power plants,nuclear power and other places,for 90 degrees open ball valves, butterfly valves, plug valves and other valves supporting the use of the company's supply of valve turbine box can also be used according to customer requirements on the product speed ratio, use temperature, protection level, anti-corrosion level, Adjust customization, The company is based on domestic and international markets, Customers mainly come from famous foreign valve enterprises, Middle East, Europe and America.
lMain uses of products
The manual mechanism is combined with the pneumatic actuator assembly to realize manual or pneumatic drive for butterfly valves,ball valves, etc.which are opened at 90 degrees.
lCharacteristic
1.It is small in size, light in weight and reasonable in design.
2.Products are serialized and output torque is matched with pneumatic devices.
3.Turbine connection holes have two key-ways 90 degrees apart so that users can choose the relative position of the device with the valve according to their needs.
4.Lifting the limit puling ring,rotating the eccentric device 90 degrees limit pin automatic limit to achieve pneumatic, otherwise to achieve manual.
5.Product factory,equipped with special grease, and valve assembly, the overall seal,dust proof,water proof,protection grade IP65,IP67,IP68 opional.
lTechnical parameters of SD series pneumatic valves manual operation mechanism
Manual mechanism type | DA Double Action | SA Spring return | Speed ratio | Output torque |
SD-1 | DA40-DA70 | SA60 | 26:1 | 180 |
SD-2 | DA80 | SA70-SA80 | 28:1 | 320 |
SD-3 | DA90-DA100 | SA90-SA100 | 38:1 | 680 |
SD-4 | DA125-DA140 | SA125 | 54:1 | 1200 |
SD-5 | DA160 | SA140 | 80:1 | 2100 |
SD-6 | DA180 | SA160 | 78:1 | 3000 |
SD-7 | SA180 | 98:1 | 3800 | |
SD-8 | DA220 | SA220 | 270:1 | 6000 |
SD-9 | DA260 | SA260 | 320:1 | 9000 |
lMain components and materials
No. | Name | Material Science | No. | Name | Material Science |
1 | Drive spindle | Alloy steel | 9 | Worm gear | Spheroidal graphite cast iron |
2 | Seal ring | NBR | 10 | Plane bearing | Alloy steel |
3 | Reed spring | Stainless steel(304) | 11 | Handle | Stainless steel(304) |
4 | Upper cover | Aluminium alloy | 12 | Eccentric sleeve | Alloy steel |
5 | Fasteners | Stainless steel(304) | 13 | Seal ring | NBR |
6 | Positioning pin | Alloy steel | 14 | Worm | Alloy steel |
7 | Seal ring | NBR | 15 | Transmission rod | Alloy steel |
8 | Seal ring | NBR | 16 | Box | Aluminium alloy |
lSD-01~07 pneumatic valve handheld mechanism connection size table
Specification and model | SD-1 | SD-2 | SD-3 | SD-4 | SD-5 | SD-6 | SD-7 |
A | F07 | F10 | F12 | F14 | F14 | F16 | F16 |
B | Ф57 | Ф70 | Ф89 | Ф108 | Ф108 | Ф159 | Ф159 |
C | F05 | F07 | F07/F10 | F10/F12 | / | / | / |
D | 14*14 | 17*17 | 22*22 | 27*27 | 36*36 | 46*46 | 46*46 |
E | 16 | 18 | 22 | 30 | 40 | 50 | 51 |
F | 105 | 113 | 130 | 165 | 177 | 199 | 200 |
G | 22 | 22 | 28 | 32 | 45 | 53 | 53 |
H | 14*14 | 17*17 | 22*22 | 27*27 | 36*36 | 46*46 | 46*46 |
N | 115 | 135 | 160 | 200 | 244 | 280 | 315 |
W | 89 | 125 | 140 | 187 | 220 | 250 | 286 |
J | F07 | F10 | F12 | F14 | F16 | F16 | F16 |
K | F05 | F07 | F07/F10 | F10/F12 | F14 | / | / |
L | 180 | 220 | 247 | 330 | 370 | 398 | 420 |
M | 71 | 91 | 103 | 147.8 | 150 | 158 | 171 |
Hand wheel outer diameter | Ф180 | Ф200 | Ф280 | Ф320 | Ф400 | Ф500 | Ф600 |
Reference weight(kg) | 3 | 4.5 | 7 | 13.7 | 22 | 30 | 38 |
lMain Technical Parameter
Model | Walve Conn(ISO5211) | Actuator Conn(ISO5211) | ||||||||||||||||||||
S×S | d | b | t | D | D1 | 4-M1 | D2 | 4-M2 | AxA1 | D3 | 4-Ф1 | D4 | 4-Ф2 | H | h | h1 | Ф | L | B | C | F | |
SD-08 | 60×60 | 75 | 20 | 79.9 | Ф110 | F16 | 4-M20 | / | / | Ф210 | / | / | F25 | 8-Ф18 | 188 | 145 | 5 | 500 | 365 | 406 | 370 | 315 |
60×60 | 75 | 20 | 79.9 | Ф110 | F25 | 8-M16 | / | / | Ф300 | / | / | F25 | 8-Ф18 | 188 | 145 | 5 | 500 | 365 | 425 | 388 | 315 | |
SD-09 | 60×60 | 105 | 28 | 111.4 | Ф150 | F25 | 8-M16 | / | / | Ф300 | / | / | F25 | 8-Ф18 | 244 | 185 | 2 | 500 | 463 | 432 | 386 | 300 |
Note: The SD-08 and SD-09 housings are made of cast steel.
KANEDE CONTROLS. produces high quality solutions for pneumatic and electric valve automation.
E-mail: support@kanede.com
Tel: 0086-519-85557268
Fax: 0086-519-85557368
Add: No. 206 Yuntaishan Road., Xinbei District, Changzhou, Jiangsu province, China
