Bracket-KANEDE Controls

Product category

Contact Us

Tel: 0086-519-85557268
Email: support@kanede.com
Add: No. 206 Yuntaishan Road., Xinbei District, Changzhou, Jiangsu province, China

Shopping Cart

Delete all items

Proceed to send inquiry

Bracket

It's used for the transition between valves and actuators, with good adaptability and a variety of materials and colors to choose from

Inquire Now

Product Detail

Product material and introduction

	Material	304 stainless steel
	Application	Primarily utilized for the connection between the valve shaft and the actuator hole
	Features	CNC precision machining is employed, finished products are provided, and direct installation is available
	Surface treatment	Theoriginal color of stainless steel
	Note	1. If the square size does not match the actuator, you can add and replace the sleeve. 2. The depth of the valve shaft inserted into the shaft sleeve hole should be no less than 1.0B.

Selection drawing

Core Dimensions

A、B、h

The height h should be considered in combination with the support, and it is generally appropriate to ensure that the upper end of the connecting shaft cylinder is 1-3mm lower than the upper plane of the support.

Product size data

Modelnumber A to B-h	Fit withbracketheight	Match with valve reference	Actuator connection end	Valve connector		Column height h	Total Height H	Outer ring D	Weight Kg
Modelnumber A to B-h	Fit withbracketheight	Match with valve reference	Square head *AA**	Squarehole B*B	Hole depth F	Column height h	Total Height H	Outer ring D	Weight Kg
11to9-38	40	DN6-10	11*11	9*9	12	38	54	20	0.1
11to9-38	40	DN6-10	11*11	9*9	15	38	54	20	0.1
11to9-46	48	DN15-20	11*11	9*9	11	46	62	20	0.12
14to9-46	48	DN15-20	14*14	9*9	11	46	64	20	0.133
11to11-46	48	DN25-32	11*11	11*11	12	46	62	24	0.175
14to11-46	48	DN25-32	14*14	11*11	12	46	64	24	0.178
17to11-46	48	DN25-32	17*17	11*11	15	46	68	24	0.197
14to14-46	48	DN32-50	14*14	14*14	20	46	62	25	0.163
17to14-46	48	DN32-50	17*17	14*14	15	46	68	25	0.200
14to14-60	62	DN32-50	14*14	14*14	20	60	78	28	0.277
17to14-60	62	DN32-50	17*17	14*14	18	60	82	28	0.31
22to14-60	62	DN50	22*22	14*14	18	60	85	28	0.353
17to17-71	73	DN65-80	17*17	17*17	24	71	93	34	0.484
22to17-71	73	DN65-80	22*22	17*17	24	71	93	34	0.515
27to17-71	73	DN100	27*27	17*17	24	71	93	34	0.56
22to22-71	73	DN100-125	22*22	22*22	27	71	96	40	0.67
27to22-71	73	DN100-125	27*27	22*22	27	71	103	40	0.76
27to27-88	90	DN150	27*27	27*27	36	88	120	50	1.31
36to27-88	90	DN150	36*36	27*27	36	88	125	50	1.45
36to32-102	105	DN200	36*36	32*32	40	102	142	62	2.8
36to36-102	105	DN200	36*36	36*36	40	102	142	62	2.7

*The dimensions should be meticulously verified prior to acquisition, while the weight serves merely as a reference for logistical calculations.

Product material and introduction

	Material	304 Precision Casting
	Application	Primarily utilized for the installation and connection of valve bodies and actuators.
	Features	Excellent corrosion resistance, ready-to-use finished products, direct installation capability.
	Surface treatment	Fine shot blasting followed by pickling to achieve a white finish.
	Note	1. The screws at both the valve end and actuator end should be installed into the screw holes of the outer ring of the support as closely as possible. 2.Ensure compatibility with the actual opening and closing torque specifications of the valve.

Selection drawing

Core Dimensions

Ball Valve Ends: d1, d2

Actuator End: D1

Support Height: The height (H) must be considered in conjunction with both the connecting shaft and valve shaft; it is advisable to ensure that the upper end of the connecting shaft cylinder is positioned 1-3mm lower than the support plane.

Product size data

Model number	Collocation reference	Valve connector				Actuator connection end	Overall dimension			weight Kg
Model number	Collocation reference	d1		D2		D1	H	W	L	weight Kg
ZF1#	DN15-25	36	F03	50	F05	50(F05)	48	51	51	0.23
ZF2#	DN32-50	50	F05	70	F07	70(F07)	48	70	70	0.43
ZF3#	DN65-100	70	F07	102	F10	102(F10)	73	96	96	0.9
ZF4#	DN125-150	102	F10	125	F12	125(F12)、140(F14)	90	132	132	1.6

*The size should be checked in detail before purchase, and the weight is only used as a reference for transportation calculation.

Product Material and Description:

	Material	20Cr/20# Steel
	Application	Primarily utilized for the connection between valve shafts and actuator openings.
	Features	Cold forming, ready-to-install finished products.
	Surface treatment	Chrome-plated or galvanized.
	Note	1. Designed for concave shaft-type fine small electrical equipment or pneumatic actuators. 2. This product is mainly designed for the Tianjin type 71 series soft seal center line butterfly valve.

Selection drawing

Core Dimensions

A、d、h

The height (h) should be determined with a comprehensive consideration of the bracket and valve shaft. Generally, it is advisable to ensure that the upper end of the connecting shaft cylinder is positioned 1-3mm lower than the upper plane of the bracket.

Product size data

Model number Square head round hole - column height A to d-h	collocation reference	Actuator end	Valve end (circular hole)			Height of column h	Total height H	Excircle D	weight kg	material
	collocation reference	Square head *AA**	Aperture d	Keyway t	Hole depth F	Height of column h	Total height H	Excircle D	weight kg	material
11to12.7-45	DN50-80	11*11	12.8	3	33	45	60	25	0.15	20Cr
14to15.9-52	DN100	14*14	15.9	5	36	52	76	30	0.25	20Cr
17to15.9-52	DN100	17*17	15.9	5	36	52	76	30	0.26	20Cr
17to19.1-52	DN125-150	17*17	19.1	5	35	52	73	35	0.34	20Cr
22to22.2-60	DN200	22*22	22.3	5	44	60	92	40	0.56	20Cr
27to28.7-60	DN250	27*27	28.7	8	45	60	95	50	0.90	20Cr
36to28.7-60	DN250	36*27	28.7	8	45	60	95	50	1.03	20Cr
27to31.8-60	DN300	27*27	31.8	8	52	60	95	55	0.93	20Cr
36to31.8-60	DN300	36*36	31.8	8	52	60	95	55	1.06	20Cr
14to12.7-46	DN50-80	14*14	12.8	3	27	46	64	24	0.15	20#steel
17to19.1-52	DN125-150	17*17	19.1	5	31	52	72	30	0.235	20#steel